Products tagged with 'adapter'

Use the ANEC when you want to make your own reflector or light modifier. This has the right size neck to fit the Lumedyne Heads and other brands too. It even has the notches to guide between the normal and wide angle flashtube positions. The rear flange portion has four mounting holes to allow you to create a reflector from nearly any surface.

This square softbox speed ring is made of plastic and surrounds a machined aluminum center neck that replaces the Lumedyne reflector so the flashtube is well inside the back of the softbox. It has a 1/4-20 threaded mount to use directly on the lightstand or with a swivel so even large square and rectangular softboxes can be used. The Flash Head is hanging onto the rear at the reflector mount but without any leverage or weight on it.

This small adapter is designed for items that might mount on top of a camera style hot-shoe that you would rather mount on top of your Lumedyne Head. A Pocket Wizard™ or other brand of radio slave is a good example of what might be mounted in this shoe. It does not transmit the sync signals all the appropriate sync cords are still used, it's just a solid mounting point.

If you want to build your own small battery this enclosure is 3 inches tall outside. It has the right connector to attach to the Lumedyne Power Packs. It has the keeper clips for the Pack's latches. It has a simple DC charge jack of 2.1mm by 5mm and a charging LED but no further charge control circuit or PEPI. No battery or charger is included

If you want to build your own small battery this enclosure is 2.2 inches tall outside. It has the right connector to attach to the Lumedyne Power Packs. It has the keeper clips for the Pack's latches. It has a simple DC charge jack of 2.1mm by 5mm and a charging LED but no further charge control circuit or PEPI. No battery or charger is included

If you want to build your own small battery this enclosure is 1.5 inches tall outside. It has the right connector to attach to the Lumedyne Power Packs. It has the keeper clips for the Pack's latches. It has a simple DC charge jack of 2.1mm by 5mm and a charging LED but no further charge control circuit or PEPI. No battery or charger is included

If you want to build your own extra large battery this enclosure is 5.75 inches tall outside. It has the right connector to attach to the Lumedyne Power Packs. It has the keeper clips for the Pack's latches. It has a simple DC charge jack of 2.1mm by 5mm and a charging LED but no further charge control circuit or PEPI. No battery or charger is included

The Quantum™ brand Q-Flashes with an X in the Part number are designed to run from a Pack like the Lumedyne brand. In order to plug in their black four pin plug into the Lumedyne metal six pin socket, then you need an adapter like this one. It's true that Quantum™ also sells their own version of this adapter cable, however, we use a better strain relief system that helps prevent clamping the cable into a short circuit and perhaps damaging some electronics.