Lumedyne, Inc.

This Charger works at a Quick rate from any AC wall voltage worldwide and includes plug adapters for most of the world. It charges Small Batteries as fast as 3 hours and can charge all sizes of Lumedyne Batteries and Cyclers. This is the "normal" charger for all batteries because we no longer offer a basic Trickle Charger. This is not recommended for batteries older than from 2002 with serial number below 149300. If your battery is that old, contact Lumedyne directly. If you paid to update your PEPI in the battery, then it is OK.

The AR5K is the normal size as we have used for all of these years which is five inches across. This reflector is black on the outside with a shiny silver finish inside. The kit includes a grid to keep the angle limited to about 40 degrees. A simple plastic diffuser cover is also included.

This is a high quality Op/Tech shoulder strap designed for years of use with elastic and neoprene springs that engage in making it comfortable and feeling like there is less weight on your shoulder while you carry the Lumedyne Pack system around.

This is the high performance replacement bulb for the glowing modeling light in the center of the Lumedyne Modeling style Flashtubes. It is about 25 watts but is almost 50% brighter than a normal Halogen bulb. So for the same drain as our other AMBR bulb this one is a bit brighter. It does also use your battery at a rate of one 200ws flash per 20 seconds of modeling light use. This AMBX bulb is also more durable against high temperature for extended use or high power flashes or rapid flashes where in all cases more than the normal heat is involved and a normal bulb would frost over white and fail due to overheating. It is user replaceable by simply first removing the flashtube then pulling the burned out bulb straight out. After carefully replacing the AMBX into the Head's legs, the flashtube fits around it and plugs back into place.

The ASC1 is the short coiled sync cord that would plug from the round sync jack on many professional cameras to the household sync jack on many Lumedyne Flash Heads. It is about two feet long before stretching the coils out and could reach almost five feet (but might not shrink back all the way if stretched too far).

QUICK-/ TRICKLE CHARGER REFURBISHED WITH 1-YEAR WARRANTY

This is the cable to plug from a Lumedyne HV Cycler or Quantum™ Turbo to the Vivitar™ brand flashes that have a high voltage connection. This coiled cable stretches from just under three feet to over five feet long. However, if you stretch it too much it won't spring back to have tight coils any more.

This is the cable to plug from a Lumedyne HV Cycler or Quantum™ Turbo to the Canon™ brand flashes that have a high voltage connection. This also fits a number of other brands like Nissin™ and Triopo™ as well as others which have copied the Canon style flashes. This coiled cable stretches from just under three feet to over five feet long. However, if you stretch it too much it won't spring back to have tight coils any more.

This is the cable to plug from a Lumedyne HV Cycler or Quantum™ Turbo to the Nikon™ brand flashes that have a high voltage connection. This also fits a number of other brands like Nissin™ and others which have copied the Nikon style flashes. This coiled cable stretches from just under three feet to over five feet long. However, if you stretch it too much it won't spring back to have tight coils any more.