Lumedyne, Inc.

The single red cover for a Lumedyne Head jack is ready to cover one Head jack when not in use. It is one of the same ones that were included with the Classic Power Packs. It has no holes in it, so it is best sealed but it is not water proof. This is the individual little red round cover that most people eventually lost that came standard on the Classic Packs or the ones attached with a leash to the front of the modern Packs.

This is one of two diffusors that simply snap onto the silver 5" reflectors that we have made for about 45 years. This version is the more clear diffusor that will lose only 1/3 of an f-stop as it slightly softens and diffuses the light going through it. Some UV light is absorbed as well so the light is softer and warmer than when direct from the reflector.

This is one of two diffusors that simply snap onto the silver 5" reflectors that we have made for about 45 years. This version is the more cloudy diffusor that will lose almost an f-stop as it considerably softens and diffuses the light going through it. Some UV light is absorbed as well so the light is softer and warmer than when direct from the reflector.

The set of two red covers for the Head jacks are secured together by a short nylon line. There is enough length between them to also go through the D-ring and stay secured to the Power Pack. These are similar to the individual covers that most people eventually lost that came standard on the Classic Packs or the ones attached to the front of the modern Packs.

The set of two switch caps include a red and white one for the top of the Lumedyne Power Packs. Using the switch covers helps extend the lifespan of the switch by keeping dust and debris out of it.

This durable cloth adapter with two D-rings is designed for supporting your two piece Lumedyne Cyclers and their attached Battery by a shoulder strap since those Cyclers did not include any shoulder strap D-rings.

This Belt Clip fits the Lumedyne HV Cyclers and many of the Classic Packs that had inserts for the use of one or two belt clips. There are different hole spacings between the Classic Cyclers and Packs and the newest Cyclers so this belt clip has three holes to fit any of those products.

This is the straight silver tube that you may remember from your Flash Head box when it was new. You can use it for flashtube protection or for a simple snoot to limit the light to a very small area.

This is a simple addition to a bracket when you want to be able to aim the Head up and down. There are two adjustable disks that allow you to set the ending angle in each direction. Some set screws allow you to adjust the range of movement and it is designed to bolt onto 1/4-20 holes or use the nuts and bolts.