Lumedyne, Inc.

The HQRC has a 2400ws Quartz Flashtube plus a modeling light. The Next Generation Heads look the closest to the old classic design because they have the round cylindrical shape to the body. The attached 3-7 foot long Coiled Head Cord will connect to any Lumedyne Power Pack. There are two sync jacks on the rear of the Head, both the household style and the mini-phone sockets are available. The Head includes the 2400ws Quartz Flashtube, modeling lamp, five inch reflector, two diffusors and a metal snoot.

The HQRS has the high power Quartz Flashtube to be better suited for the Action Packs or use over 800ws. The Next Generation Heads look the closest to the old classic design because they have the round cylindrical shape to the body. The attached five foot long straight Head Cord will connect to any Lumedyne Power Pack. There are two sync jacks on the rear of the Head, both the household style and the mini-phone sockets are available near the buttons for the modeling light and test flash. The Head includes the 2400ws flashtube, modeling lamp, five inch reflector, two diffusors and a metal snoot.

The BLRG Large sized Battery provides 300 flashes at 200ws with a 48 month pro-rate warranty. It uses three decks of of our no memory NiCd battery cells and is about 3 inches tall and weighs just over three and a half pounds.

The BLSM is a type of Lithium battery. It has a battery gauge right on the front of the battery. These charge up the fastest, hold their charge the best, last for the most charge cycles, have the longest pro-rate warranty and have the most flashes per pound of any of our battery options. You must use the CL3U LiFePo4 Charger but it will be finished charging up in less than an hour and a half. At 200ws this Battery provides 250 flashes per charge. BLSM Small LiFePo4 Battery is a safe style of Lithium chemistry that will not explode and is very lightweight with a lot of flashes per charge and over 2000 charge cycles.

The HSMQ is the smallest 2400ws Flash Head with a modeling light in the whole world! It's not crazy expensive for what you get in this tiny Flash Head. It has the same high quality circuits and flashtubes and modeling bulb as the more expensive Heads, just in a smaller molded enclosure. The HSML is electronically the same as the larger heads except for the lack of the household sync connector. This is an awesome Head for on a camera bracket or boom arm since it is so small and lightweight. If you wanted to use it on a light stand, it has twin 1/4-20 mounts for the stand and an accessory of your choice. This Head includes a grid and diffusor set with the reflector, a Modeling Bulb (AMBR) and 2400ws Modeling Flashtube (AFTQ).

The X4BC goes between the Battery and most Lumedyne Power Packs to add 400ws of additional power to the Pack above it. It has a switch that controls: no boost, or add 200ws, or add the full 400ws to the Power Pack above it. It is only about three inches tall and weighs about 2.5 lbs. and it will add an f-stop to the 400ws Packs since it doubles the available power. For the 200ws Pack, that's a stop and a half brighter. These are also stackable to go up as high as 2400ws by adding five of these to a 400ws Pack.