You have no items in your shopping cart.
Products
Lumedyne is location lighting and portable professional flash equipment.
We offer Cyclers and the X to power other brands of flashes. And, we have a modular flash system that has a proven track record of being a highly reliable source of light for professional photographers for over 45 years.
To build a full flash system, you wil need a Power Pack, a Flash Head, a Battery and a Charger. Some added cables and accessories might be a great addition and you need to trigger the system with a radio or light slave or a sync cord.
We have photographers on staff to answer your questions, so give us a call and let us help you create your own perfect lighting solution for on location.
BMHL Large Battery NiMh
BMHL
The BMHL Large Battery provides 450 flashes at 200ws with a Four Year pro-rate warranty. It uses three decks of high amp hour NiMh battery cells and is about 3 inches tall and weighs just over four pounds.
$550.00
AMBR Modeling Bulb (Halogen)
AMBR
This is the normal replacement bulb for the glowing modeling light in the center of the Lumedyne Modeling style Flashtubes. It is about 25 watts bright and does use your battery at a rate of one 200ws flash per 20 seconds of modeling light use.
It is user replaceable by simply first removing the flashtube then pulling the burned out bulb straight out. After carefully replacing the AMBR into its legs, the flashtube fits around it and plugs back into place.
$25.00
AFTE 800ws Flashtube for Modeling and Non-modeling Flash Heads
AFTE
AFTE Flashtubes fit all of the existing Lumedyne Flash Heads with or without the modeling light feature. They also fit in the new Extra Small Heads. They can be used at low power as well but should not be used above 800ws per Head as that is the upper rating of this flashtube's performance.
The Flashtubes push/pull straight in/out and they will last for tens of thousands of flashes or one face down fall onto a hard surface.
Any of the Heads can use this flashtube, however, the modeling lamp itself is separate and this flashtube does not convert a non-modeling Head to have that feature.
$85.00
AFTQ 2400ws Quartz Flashtube for Modeling and Non-modeling Flash Heads
AFTQ
AFTQ 2400ws Quartz Flashtubes fit all of the existing Lumedyne Flash Heads with or without the modeling light feature. They also fit in the new Extra Small Heads. They can be used at low power as well and can be used up to 2,400ws as that is the upper rating of this flashtube's performance.
The Flashtubes push/pull straight in/out and they will last for tens of thousands of flashes or one face down fall onto a hard surface.
Any of the Heads can use this flashtube, however, the modeling lamp itself is separate and this flashtube does not convert a non-modeling Head to have that feature.
$383.00
ASC1 Standard Household to PC Sync Cord
ASC1
The ASC1 is the short coiled sync cord that would plug from the round sync jack on many professional cameras to the household sync jack on many Lumedyne Flash Heads.
It is about two feet long before stretching the coils out and could reach almost five feet (but might not shrink back all the way if stretched too far).
$52.95
ASC5 30 Foot Household to PC Sync Cord
ASC5
The ASC5 is the long straight sync cord (30 feet is about 9 meters) that would plug from the round sync jack on many professional cameras to the household sync jack on many Lumedyne Flash Heads.
It's perfect as a back up option to radio slaves when you want an off camera light and you have a PC sync connection or adapter on your camera.
$45.00