P4LX 400ws Deluxe Signature Series Power Pack

The 400ws Deluxe Signature Pack has seven settings from 6ws to 400ws on a single dial control. There is a separate Trim Control to go smoothly between the f-stops also. The Pack has a seven light battery gauge and can run with fast or extra fast recycling times. Deluxe Signature Series Packs have TTL controls for film cameras and very few digital cameras which still use TTL like Hasselblad or Phase One (NOT Canon™, Nikon™ or Sony™ for example). Signature Deluxe Packs are compatible with all sizes and styles of Lumedyne batteries and can power any of the Lumedyne Heads. The Pack can be boosted up to higher power or sped up with High Speed Modules and can run from most Lumedyne AC Power adapters.
Manufacturer: Lumedyne, Inc.
SKU: P4LX
$1,600.00

The P4LX Deluxe Signature Series is popular for those who want exact power control with the Trim feature.  This is our "top of the line" flash with all of the features.  It offers power settings from 400ws, 200ws, 100ws and 50ws like the older Classic Packs but also has lower power settings at 25ws, 12ws and 6ws.  Once you select the main setting then you can Trim down that setting to exactly where you want it between the f-stops.  These lower power settings are very valuable when you wish to shoot at higher ISO settings and get lower f-stops for limited depth of field.  The control between settings can be important if you don't want to move the head closer or further to get the exact exposure that you want.

Power on/off and all seven main power settings are easily selected with a single rotating dial in the center of the Pack. The Trim control is also on top and is a smaller rotating knob.  The third knob is a TTL volume control for a confirmation tone only used for TTL and only active when TTL signals from a Metz™ brand TTL module is used to trigger the Deluxe Signature Series Flash Heads.  If TTL is not desired, any model Lumedyne Head is OK.

The battery gauge is simple and has an on/off switch while the pack is running.  There is a separate switch to select between fast or extra fast recycling times.  Faster recycling does get less flashes per charge from each Battery charge.  The Signature Series can use the classic NiCd batteries, the newer NiMh cells or the LiFePo4 Lithium options but the battery gauge will be the most accurate for the first two since the LiFePo4 Batteries have their own accurate gauge on the Battery.

You can run one or two Flash Heads from the front of the Pack and if two Heads are used, they simply divide the available setting in half for each Head.  By using Deluxe Boosters, you could have asymmetrical power output options too.  The Signature Packs can power all the Heads including Classic Heads and the new versions but the Ringflash Head will be less linear at the lowest power settings.  Only the Deluxe Signature Series Head will enable TTL features in your Deluxe Pack (along with the correct Metz™ TTL SCA Module) and also offers an audible beep tone after recycling to let you know that the Head is ready again.

Signature Series Packs can use Boosters to go up to higher power levels.  Unlike most Lumedyne Packs that only get brighter in the highest setting, using a Booster with a Signature Series Pack makes all of the settings brighter.  High Speed Modules will make the recycle time faster.  The international AC Power Supplies will allow you to operate without running down your batteries if you are close to a wall outlet.

The Signature Series Packs include a neoprene shoulder strap and a full two-year warranty.  The other accessories or Heads (and Head Cables), Batteries and Chargers are sold separately.

California customers: Proposition 65 WARNING
Product tags
Customers who bought this item also bought

BMHM Medium Battery NiMh

BMHM
The BMHM Battery provides 300 flashes at 200ws with a Four Year pro-rate warranty. It uses a double deck of NiMh battery cells and is about 2.2 inches tall and weighs less than three pounds.
$405.00

AMBX Extra Bright Modeling Bulb (Quartz/Halogen)

AMBX
This is the high performance replacement bulb for the glowing modeling light in the center of the Lumedyne Modeling style Flashtubes. It is about 25 watts but is almost 50% brighter than a normal Halogen bulb. So for the same drain as our other AMBR bulb this one is a bit brighter. It does also use your battery at a rate of one 200ws flash per 20 seconds of modeling light use. This AMBX bulb is also more durable against high temperature for extended use or high power flashes or rapid flashes where in all cases more than the normal heat is involved and a normal bulb would frost over white and fail due to overheating. It is user replaceable by simply first removing the flashtube then pulling the burned out bulb straight out. After carefully replacing the AMBX into the Head's legs, the flashtube fits around it and plugs back into place.
$50.00

HCCD Head Cord Coiled 3-7 Foot long

HCCD
This coiled extension cord for the Lumedyne Heads is about 3 feet long before you start to stretch it and can easily stretch to about 7 feet. It has the silver round Head plugs at each end; one male for the Pack end and one female for the Head end. This is a direct Head Cord for the Signature Heads and an extension cord for the other Heads that have a cord already.
$175.00

CQ1P International Single Quick Charger USA, UK, Euro & AU

CQ1P
This Charger works at a Quick rate from any AC wall voltage worldwide and includes plug adapters for most of the world. It charges Small Batteries as fast as 3 hours and can charge all sizes of Lumedyne Batteries and Cyclers. This is the "normal" charger for all batteries because we no longer offer a basic Trickle Charger. This is not recommended for batteries older than from 2002 with serial number below 149300. If your battery is that old, contact Lumedyne directly. If you paid to update your PEPI in the battery, then it is OK.
$49.95