You have no items in your shopping cart.
Products
Lumedyne is location lighting and portable professional flash equipment.
We offer Cyclers and the X to power other brands of flashes. And, we have a modular flash system that has a proven track record of being a highly reliable source of light for professional photographers for over 45 years.
To build a full flash system, you wil need a Power Pack, a Flash Head, a Battery and a Charger. Some added cables and accessories might be a great addition and you need to trigger the system with a radio or light slave or a sync cord.
We have photographers on staff to answer your questions, so give us a call and let us help you create your own perfect lighting solution for on location.
AFTE 800ws Flashtube for Modeling Flash Heads
AFTE
AFTE Flashtubes fit all of the existing Lumedyne Flash Heads with or without the modeling light feature. They also fit in the new Extra Small Heads. They can be used at low power as well but should not be used above 800ws per Head as that is the upper rating of this flashtube's performance.
The Flashtubes push/pull straight in/out and they will last for tens of thousands of flashes or one face down fall onto a hard surface.
Any of the Heads can use this flashtube, however, the modeling lamp itself is separate and this flashtube does not convert a non-modeling Head to have that feature.
$85.00
AFSQ 2400ws Quartz Flashtube for Standard non-modeling Flash Heads
AFSQ
AFSQ 2400ws Quartz Flashtubes fit all of the standard Flash Heads such as the Classic #001 and #002 Heads that had no modeling light feature. They also fit the new Extra Small Basic Heads HSBC or HSBQ.
This is a super duty flashtube for high power or Action Packs' fast flash duration.
The Flashtubes push/pull straight in/out and they will last for tens of thousands of flashes or one face down fall onto a hard surface.
Any of the Heads that have a modeling light would use the AFTE instead of this one.
$383.00
AFSE 800ws Flashtube for Standard non-modeling Flash Heads
AFSE
AFSE Flashtubes fit all of the standard Flash Heads such as the Classic #001 and #002 Heads that had no modeling light feature. They also fit the new Extra Small Basic Heads HSBC.
The Flashtubes push/pull straight in/out and they will last for tens of thousands of flashes or one face down fall onto a hard surface.
Any of the Heads that have a modeling light would use the AFTE instead of this one.
$149.95
ADG4 Soft Diffuser Globe - 6 Inch
ADG4
The ADG4 is a very simple but effective way to spread the light over a very wide area. While it does diffuse away 2.5 f-stops from the hottest part of the non-diffused direct reflector, it also spreads the light coverage from about 60 degrees to over 180 degrees.
It is not perfectly even on a reflector in order to allow you to still aim the light where you want it the strongest, but it is perfectly even if you mount it "bare bulb" for that purpose.
$55.00
ADC2 Diffusor Cover / UV Filter - Cloudy
ADC2
This is one of two diffusors that simply snap onto the silver 5" reflectors that we have made for about 45 years. This version is the more cloudy diffusor that will lose almost an f-stop as it considerably softens and diffuses the light going through it.
Some UV light is absorbed as well so the light is softer and warmer than when direct from the reflector.
$4.00
ADC1 Diffusor Cover / UV Filter - Clear
ADC1
This is one of two diffusors that simply snap onto the silver 5" reflectors that we have made for about 45 years. This version is the more clear diffusor that will lose only 1/3 of an f-stop as it slightly softens and diffuses the light going through it.
Some UV light is absorbed as well so the light is softer and warmer than when direct from the reflector.
$4.00
ACCX Two Red Head Jack Covers secured together
ACCX
The set of two red covers for the Head jacks are secured together by a short nylon line. There is enough length between them to also go through the D-ring and stay secured to the Power Pack.
These are similar to the individual covers that most people eventually lost that came standard on the Classic Packs or the ones attached to the front of the modern Packs.
$7.00
ACCP Single Red Head Jack Cover
ACCP
The single red cover for a Lumedyne Head jack is ready to cover one Head jack when not in use. It is one of the same ones that were included with the Classic Power Packs. It has no holes in it, so it is best sealed but it is not water proof.
This is the individual little red round cover that most people eventually lost that came standard on the Classic Packs or the ones attached with a leash to the front of the modern Packs.
$2.00
ACAP Color Caps - Cloth covers in 7 different colors
ACAP
These colorful fabric covers are designed to fit any five to six inch reflectors and use elastic to stay on the front of the reflector. They cast a very even and smooth broadcast of colored light due to the thin cloth diffusion material. The colors can be seen in the photo as all kits are the same selection.
$85.00