Products tagged with 'flash head'

View as Grid List
Sort by
Display per page

ASC1 Standard Household to PC Sync Cord

ASC1
The ASC1 is the short coiled sync cord that would plug from the round sync jack on many professional cameras to the household sync jack on many Lumedyne Flash Heads. It is about two feet long before stretching the coils out and could reach almost five feet (but might not shrink back all the way if stretched too far).
$45.00

ASC5 30 Foot Household to PC Sync Cord

ASC5
The ASC5 is the long straight sync cord (30 feet is about 9 meters) that would plug from the round sync jack on many professional cameras to the household sync jack on many Lumedyne Flash Heads. It's perfect as a back up option to radio slaves when you want an off camera light and you have a PC sync connection or adapter on your camera.
$45.00

ASNT Snoot (Silver and Straight) As Supplied With Most Heads

ASNT
This is the straight silver tube that you may remember from your Flash Head box when it was new. You can use it for flashtube protection or for a simple snoot to limit the light to a very small area.
$17.00

ATTE Flashtube Extender

ATTE
The ATTE goes into a Flash Head where the Flashtube normally goes and adds about an inch to the position of the Flashtube from the face of the Head. This is generally preferred when you need a different coverage from a custom reflector than the tube provides from it's normal location.
$60.00

HC10 Straight 10 Foot Head Cable

HC10
The Straight Head Cable HC10 is about 10 feet long and has a male end that plugs towards the Power Pack and a female end that matches with the male plugs on the Flash Heads. This is a suitable way to extend the Head's built-in cable by an extra ten feet or to use a ten foot cable directly to the male plug on the Signature Series Heads.
$185.00

HC20 Straight 20 Foot Head Cable

HC20
The Straight Head Cable HC20 is about 20 feet long and has a male end that plugs towards the Power Pack and a female end that matches with the male plugs on the Flash Heads. Thats about six meters long. This is the longest cable we offer and is a suitable way to extend the Head's built-in cable by an extra twenty feet or to use a twenty foot cable directly to the male plug on the Signature Series Heads.
$195.00

HCCD Head Cord Coiled 3-7 Foot long

HCCD
This coiled extension cord for the Lumedyne Heads is about 3 feet long before you start to stretch it and can easily stretch to about 7 feet. It has the silver round Head plugs at each end; one male for the Pack end and one female for the Head end. This is a direct Head Cord for the Signature Heads and an extension cord for the other Heads that have a cord already.
$175.00

HCST Straight 5 Foot Head Cable

HCST
The Straight Head Cable HCST is about 5 feet long and has a male end that plugs towards the Power Pack and a female end that matches with the male plugs on the Flash Heads. This is a suitable way to extend the Head's built-in cable by an extra five feet or to use a five foot cable directly to the male plug on the Signature Series Heads.
$175.00

HEBC Basic Signature Series Head 800ws - No Head Cord

HEBC
The Basic Signature Head is very strong with the square metal shell but it's still only about one pound. It's sold separately from the Head Cables to allow you to select from 5 to 20 foot options. It works with any Lumedyne Head Cable or Head Extension Cable. The Head originally does include the reflector, 2 diffusors, a metal snoot and the 800ws Flashtube and a 25 watt modeling bulb.
$440.00