Lumedyne, Inc.

This is the cable to plug from a Lumedyne HV Cycler or Quantum™ Turbo to the Sunpak™ brand flashes that have a three pin high voltage connection. We offer two versions of this cable with a different plug at the Sunpak end. So, select the 90 degree or straight version at checkout. This coiled cable stretches from just under three feet to over five feet long. However, if you stretch it too much it won't spring back to have tight coils any more.

QUICK-/ TRICKLE CHARGER REFURBISHED WITH 1-YEAR WARRANTY

The ADG4 is a very simple but effective way to spread the light over a very wide area. While it does diffuse away 2.5 f-stops from the hottest part of the non-diffused direct reflector, it also spreads the light coverage from about 60 degrees to over 180 degrees. It is not perfectly even on a reflector in order to allow you to still aim the light where you want it the strongest, but it is perfectly even if you mount it "bare bulb" for that purpose.

The ASC1 is the short coiled sync cord that would plug from the round sync jack on many professional cameras to the household sync jack on many Lumedyne Flash Heads. It is about two feet long before stretching the coils out and could reach almost five feet (but might not shrink back all the way if stretched too far).

This is the high performance replacement bulb for the glowing modeling light in the center of the Lumedyne Modeling style Flashtubes. It is about 25 watts but is almost 50% brighter than a normal Halogen bulb. So for the same drain as our other AMBR bulb this one is a bit brighter. It does also use your battery at a rate of one 200ws flash per 20 seconds of modeling light use. This AMBX bulb is also more durable against high temperature for extended use or high power flashes or rapid flashes where in all cases more than the normal heat is involved and a normal bulb would frost over white and fail due to overheating. It is user replaceable by simply first removing the flashtube then pulling the burned out bulb straight out. After carefully replacing the AMBX into the Head's legs, the flashtube fits around it and plugs back into place.

This is a high quality Op/Tech shoulder strap designed for years of use with elastic and neoprene springs that engage in making it comfortable and feeling like there is less weight on your shoulder while you carry the Lumedyne Pack system around.