Lumedyne, Inc.

The AR5K is the normal size as we have used for all of these years which is five inches across. This reflector is black on the outside with a shiny silver finish inside. The kit includes a grid to keep the angle limited to about 40 degrees. A simple plastic diffuser cover is also included.

This Charger works at a Quick rate from any AC wall voltage worldwide and includes plug adapters for most of the world. It charges Small Batteries as fast as 3 hours and can charge all sizes of Lumedyne Batteries and Cyclers. This is the "normal" charger for all batteries because we no longer offer a basic Trickle Charger. This is not recommended for batteries older than from 2002 with serial number below 149300. If your battery is that old, contact Lumedyne directly. If you paid to update your PEPI in the battery, then it is OK.

The ARWD is a silver five inch reflector and it has a shorter neck than the Standard one. That's why it sets further back from the flashtube and broadcasts a wider angle of coverage. This creates a wider broadcast of light within a one f-stop range with the first setting at a wide 80 degrees. In the first setting it is about as wide as the wider setting of the normal reflector but then it goes to extra wide 95 degrees coverage when it drops back into its dual notches.

The ASC5 is the long straight sync cord (30 feet is about 9 meters) that would plug from the round sync jack on many professional cameras to the household sync jack on many Lumedyne Flash Heads. It's perfect as a back up option to radio slaves when you want an off camera light and you have a PC sync connection or adapter on your camera.

The ARST is the normal two position Reflector that we include with most all of our Flash Heads when new. It has a hammer dimple finish on a parabolic shape that is award winning in its design in relationship to the flashtube. When it is sitting in the forward position it is normal coverage and when it drops back into the two notches, it broadcasts a wider angle.

Use the ANEC when you want to make your own reflector or light modifier. This has the right size neck to fit the Lumedyne Heads and other brands too. It even has the notches to guide between the normal and wide angle flashtube positions. The rear flange portion has four mounting holes to allow you to create a reflector from nearly any surface.