Lumedyne, Inc.

The Straight Head Cable HCST is about 5 feet long and has a male end that plugs towards the Power Pack and a female end that matches with the male plugs on the Flash Heads. This is a suitable way to extend the Head's built-in cable by an extra five feet or to use a five foot cable directly to the male plug on the Signature Series Heads.

This coiled extension cord for the Lumedyne Heads is about 3 feet long before you start to stretch it and can easily stretch to about 7 feet. It has the silver round Head plugs at each end; one male for the Pack end and one female for the Head end. This is a direct Head Cord for the Signature Heads and an extension cord for the other Heads that have a cord already.

The Straight Head Cable HC20 is about 20 feet long and has a male end that plugs towards the Power Pack and a female end that matches with the male plugs on the Flash Heads. Thats about six meters long. This is the longest cable we offer and is a suitable way to extend the Head's built-in cable by an extra twenty feet or to use a twenty foot cable directly to the male plug on the Signature Series Heads.

The Straight Head Cable HC10 is about 10 feet long and has a male end that plugs towards the Power Pack and a female end that matches with the male plugs on the Flash Heads. This is a suitable way to extend the Head's built-in cable by an extra ten feet or to use a ten foot cable directly to the male plug on the Signature Series Heads.

The Quantum™ brand Q-Flashes with an X in the Part number are designed to run from a Pack like the Lumedyne brand. In order to plug in their black four pin plug into the Lumedyne metal six pin socket, then you need an adapter like this one. It's true that Quantum™ also sells their own version of this adapter cable, however, we use a better strain relief system that helps prevent clamping the cable into a short circuit and perhaps damaging some electronics.

This Charger works at na Extra Fast rate from any AC wall voltage worldwide and includes plug adapters for most of the world. It charges larger Batteries very fast but is NOT recommended for the smaller sizes of Lumedyne Batteries or Cyclers. This is the "fastest" charger we offer for any batteries because it is too fast for the smaller ones already. However, some of the biggest batteries take so long to charge, so it's good to have a very fast option. This is NOT recommended for batteries older than from 2002 with serial number below 149300. If your battery is that old, contact Lumedyne directly.

The CU4A mounts on top of the CU1Z Charger to expand its single Battery capacity into four Batteries at once. This Adapter is not a charger by itself but does work with the Auto Charger to allow up to four Batteries to be automatically maintained and topped off without having to swap Batteries around. The CU4A does have two helpful indicators that show that the Batteries connected did reach a full charge level and another that warns you if a bad Battery is plugged into one of the connectors.

This is the only automatic Lumedyne Charger that will charge the battery first and also cycle on automatically each day to top off the Battery (or Batteries with the CU4A Adapter). This way the connected Battery(ies) are always ready to go without having to "top them off" before a shoot. This is an Ultra fast charger and stops charging based on a Delta Voltage technology rather than using the PEPI circuit in the battery. This Charger is compatible with all generations of NiCd and NiMh Batteries and is designed to keep the Lumedyne Batteries fresh and ready for the longest possible lifespan. DO NOT USE WITH LIFEPO4 BATTERIES or DIY Batteries - while it should not release the "magic" smoke, it would not work correctly for sure...

This Charger works at a Quick rate from any AC wall voltage worldwide and includes plug adapters for most of the world. It charges Small Batteries as fast as 3 hours and can charge all sizes of Lumedyne Batteries and Cyclers. This is the "normal" charger for all batteries because we no longer offer a basic Trickle Charger. This is not recommended for batteries older than from 2002 with serial number below 149300. If your battery is that old, contact Lumedyne directly. If you paid to update your PEPI in the battery, then it is OK.