Products

Lumedyne is location lighting and portable professional flash equipment.

We offer Cyclers and the X to power other brands of flashes.  And, we have a modular flash system that has a proven track record of being a highly reliable source of light for professional photographers for over 45 years.

To build a full flash system, you wil need a Power Pack, a Flash Head, a Battery and a Charger.  Some added cables and accessories might be a great addition and you need to trigger the system with a radio or light slave or a sync cord.

We have photographers on staff to answer your questions, so give us a call and let us help you create your own perfect lighting solution for on location.

View as Grid List
Sort by
Display per page

HAQQ Quantum™ Q-Flash X to Lumedyne Adapter

HAQQ
The Quantum™ brand Q-Flashes with an X in the Part number are designed to run from a Pack like the Lumedyne brand. In order to plug in their black four pin plug into the Lumedyne metal six pin socket, then you need an adapter like this one. It's true that Quantum™ also sells their own version of this adapter cable, however, we use a better strain relief system that helps prevent clamping the cable into a short circuit and perhaps damaging some electronics.
$120.00

CU4A Four Way Battery Adapter - To Be Used With CU1Z Charger

Cu4A
The CU4A mounts on top of the CU1Z Charger to expand its single Battery capacity into four Batteries at once. This Adapter is not a charger by itself but does work with the Auto Charger to allow up to four Batteries to be automatically maintained and topped off without having to swap Batteries around. The CU4A does have two helpful indicators that show that the Batteries connected did reach a full charge level and another that warns you if a bad Battery is plugged into one of the connectors.
$200.00

CU1Z Ultra Automatic International Charger - Direct Delta V Charging

CU1Z
This is the only automatic Lumedyne Charger that will charge the battery first and also cycle on automatically each day to top off the Battery (or Batteries with the CU4A Adapter). This way the connected Battery(ies) are always ready to go without having to "top them off" before a shoot. This is an Ultra fast charger and stops charging based on a Delta Voltage technology rather than using the PEPI circuit in the battery. This Charger is compatible with all generations of NiCd and NiMh Batteries and is designed to keep the Lumedyne Batteries fresh and ready for the longest possible lifespan. DO NOT USE WITH LIFEPO4 BATTERIES or DIY Batteries - while it should not release the "magic" smoke, it would not work correctly for sure...
$350.00

CQ1P International Single Quick Charger USA, UK, Euro & AU

CQ1P
This Charger works at a Quick rate from any AC wall voltage worldwide and includes plug adapters for most of the world. It charges Small Batteries as fast as 3 hours and can charge all sizes of Lumedyne Batteries and Cyclers. This is the "normal" charger for all batteries because we no longer offer a basic Trickle Charger. This is not recommended for batteries older than from 2002 with serial number below 149300. If your battery is that old, contact Lumedyne directly. If you paid to update your PEPI in the battery, then it is OK.
$49.95

CH4? Quad Hyper International Charger with Battery Gauge

CH4?
The Quad Hyper Chargers are Hyper fast, international, charge one to four batteries at once (at full speed) and have a seven light battery gauge to see the power level of your batteries. They also have damage protection, bad battery indications and use UL/CE power supplies internally. They use interchangeable standard power supply cables and you pick which country's cable you want to start with: USA, UK, EU, AU. Fast and powerful, these Chargers show you the condition of your batteries so you can better evaluate when there is a problem other than having trouble with your battery during a shoot. Hyper Chargers are intended only for modern Batteries build or modified since 2002 with the new PEPI. The Battery should have a serial number higher than 149300.
$350.00

CH2V Vehicle Hyper Charger and Power Adapter with Battery Gauge

CH2V
The name says it all because this gizmo does it all... Plug it into a cigarette lighter 12V DC jack in your car, truck, RV or drone and it can recharge Batteries or run Lumedyne Power Packs. Plus, if that were not already enough, it has a separate Battery Gauge and 6 pin connector that works independent of power to test Batteries. It's small, lightweight, versatile, and capable. Plus, with a 20 foot cable it is able to reach beyond your front seats when you want it to.
$200.00

CH2? Dual Hyper International Charger with Battery Gauge

CH2?
The Dual Hyper Chargers are Hyper fast, international, charge two batteries at once (at full speed) and have a seven light battery gauge to see the power level of your batteries. They also have damage protection, bad battery indications and use UL/CE power supplies internally. They use interchangeable standard power supply cables and you pick which country's cable you want to start with: USA, UK, EU, AU. Fast and powerful, these Chargers show you the condition of your batteries so you can better evaluate when there is a problem other than having trouble with your battery during a shoot. Hyper Chargers are intended only for modern Batteries build or modified since 2002 with the new PEPI. These Batteries have a serial number higher than 149300 or you paid to modify it.
$250.00

BXLG Extra Large Battery NiCd

BXLG
The BXLG Extra Large sized Battery provides 600 flashes at 200ws with a 100 month pro-rate warranty. It uses six decks of of our no memory NiCd battery cells and is just under six inches tall and weighs in at a little under seven pounds. This is the monster battery. This battery has the added connectors needed for the Extra Fast High Speed Module.
$700.00

BSML Small Battery NiCd

BSML
The BSML Battery provides 100 flashes at 200ws with a 48 month pro-rate warranty. It uses a single deck of NiCd battery cells and is about 1.5 inches tall and weighs just under a pound and a half.
$275.00